Magnet's Standard Measurements Listings.
Magnetised Cilindric Bars
This type of bars may be supplied in a maximum length of 150mm, or we can cut it in whatever length is required by order. The following chart shows some of the standard measurements. Magnetisation is carried out in the N-S poles.
| ØA | B |
| 3 | 100 |
| 4 | 150 |
| 5 | 150 |
| 6 | 150 |
| 7 | 150 |
| 8 | 150 |
| 9 | 150 |
| 10 | 150 |
| 12 | 150 |
| 15 | 150 |
| 3 | 10 |
| 4 | 15 |
| 5 | 20 |
| 6 | 30 |
| 8 | 20 |
| 10 | 50 |
Bridge: Two Through - Holes
It is made up of two simple fixing holes. Its purpose is to enable adaptation to guides, transport lines, ...
| Code | A | B | C | D | E | F.Trac kg. |
| IMA711 | 25.5 | 25.5 | 19 | 9.5 | 2/5 | 9 |
| IMA713 | 44.5 | 35 | 35 | 11 | 2/8 | 15 |
| IMA714 | 57 | 41 | 41 | 14.5 | 8 | 33 |
| IMA715 | 82.5 | 54 | 47.5 | 16 | 2/9.5 | 50 |
Puente: One Through - Hole
| Code | A | B | C | D | E | F.Trac kg. |
| IMA710 | 19 | 19 | 14 | 8 | 4 | 5 |
| IMA712 | 28.5 | 28.5 | 22.5 | 11 | 5 | 12 |
Horseshoe Magnets
This conventional type of magnet is produced in the shape of a horseshoe. Magnetisation is made with two poles in the same level.
| Code | A | B | C | D | F.Trac kg. |
| IMA701 | 19 | 10.4 | 15 | 4.3 | 1.5 |
| IMA702 | 22.2 | 11.1 | 7.9 | 7.9 | 2 |
| IMA703 | 28.6 | 29.4 | 7.9 | 7.9 | 3 |
Short Pot Magnets
They are designed for attraction applications and are made up of a steel body.
| Code | A | B | C | F.Trac kg. |
| IMA760 | 19 | 8 | 4 | 1 |
| IMA761 | 28.6 | 9 | 4 | 3.5 |
| IMA762 | 38 | 10.5 | 6 | 8 |
Pot Magnets
These Permanent magnets are deep and cylindrical, and are set up concentrically in a steel body. Although they have many applications, they are usually used for adhesion.
| Code | A | B | C | F.Trac kg. |
| IMA720 | 17 | 16 | M6 | 2.5 |
| IMA722 | 22 | 19 | M6 | 4.1 |
| IMA723 | 27 | 25.4 | M6 | 6.8 |
| IMA724 | 35 | 30 | M6 | 19 |
| IMA726 | 40 | 35 | M6 | 25 |
| IMA727 | 50 | 40 | M8 | 60 |
| IMA729 | 60 | 45 | M8 | 80 |
Button magnet
It is a cylindrical magnet like the “horseshoe” type. The poles are in one of the extremes of the cylinder. They are used in attraction systems.
| Code | A | B | C | F.Trac kg. |
| IMA730 | 12.5 | 9.5 | 4.5 | 0.7 |
| IMA731 | 19 | 12.5 | 5 | 1.9 |
| IMA732 | 25.5 | 16 | 5 | 3.4 |
| IMA733 | 31.5 | 25.5 | 6.5 | 4.8 |
Pot Magnets
They are alnico magnets in a steel body. This type of pot magnets are magnetised in one face, and the rest is free of magnetic field. Since it is protected, it avoids breakage or cracking. Other sizes may be supplied by order.
| Code | A | B | F.Trac kg. |
| IMA740 | 6 | 10 | 0.17 |
| IMA741 | 8 | 12 | 0.4 |
| IMA742 | 10 | 16 | 0.85 |
| IMA743 | 13 | 18 | 1.2 |
| IMA744 | 16 | 20 | 2 |
| IMA745 | 20 | 25 | 5 |
| IMA746 | 25 | 30 | 11.5 |
| IMA747 | 32 | 35 | 20 |
| IMA748 | 40 | 45 | 24 |
| IMA749 | 50 | 50 | 42 |
| IMA750 | 63 | 60 | 60 |