Pot Magnets
It is important to stand out that when we increase the temperature to its maximum permitted, the magnet’s magnetic strength decreases between 30 and 40%. This loss is temporary. When temperature is decreased, magnetic strength is recovered to its original value. Besides, another essential factor is that if maximum temperature is permitted, irreversible damage could be caused to the magnet .1. Magnetic Ferrite Systems
These systems are manufactured with anisotropic ferrite magnets. Their low cost and great magnetic pull contribute to make them the ideal system for carrying out any application as for instance assembling pieces together, cutting, joining, machining, etc. All these type of systems are protected by a metallic body, which avoids breakage in the magnet and guarantees more security in work.
Ceramic Magnetic System
Thanks to its low weight and wide surface, they are perfect for applications in any joining systems.
| Code | A | B | Weight Gr. | Str. Kg. |
| IMA10B | 10 | 4.5 | 2 | 0.4 |
| IMA13B | 13 | 4.5 | 3 | 1 |
| IMA16B | 16 | 4.5 | 4.5 | 1.8 |
| IMA20B | 20 | 6 | 10 | 3 |
| IMA25B | 25 | 7 | 19 | 4 |
| IMA32B | 32 | 7 | 30 | 8 |
| IMA36B | 36 | 8 | 40 | 10 |
| IMA40B | 40 | 8 | 55 | 12.5 |
| IMA50B | 50 | 10 | 100 | 22 |
| IMA63B | 63 | 14 | 230 | 35 |
| IMA80B | 80 | 18 | 485 | 60 |
| IMA100B | 100 | 14 | 230 | 90 |
| IMA125B | 125 | 26 | 1680 | 130 |
Through Hole Ceramic System
It has a through hole in order to make holding easier.
Chamfered Hole
| Code | ØA | B | ØC | ØD | Weight Gr. | Str. Kg. |
| IMA16C | 16 | 4.5 | 3.5 | 6.5 | 4 | 0.7 |
| IMA20C | 20 | 6 | 4.2 | 8.6 | 9 | 2.7 |
| IMA25C | 25 | 7 | 5.5 | 10.4 | 16 | 3.6 |
| IMA32C | 32 | 7 | 5.5 | 10.4 | 27 | 7.2 |
| IMA40C | 40 | 8 | 5.5 | 10.4 | 53 | 9 |
Unchamfered Hole
| Code | ØA | B | ØC | ØD | Weight Gr. | Str. Kg. |
| IMA50C* | 50 | 10 | 8.5 | 22 | 90 | 18 |
| IMA63C | 63 | 14 | 6.5 | 24 | 195 | 29 |
| IMA80C | 80 | 18 | 6.5 | 11.5 | 478 | 54 |
| IMA100C | 100 | 22 | 10.5 | 34 | 820 | 68 |
Exterior Thread Ferrite Bases
They have an exterior metric, and may be used in different holding systems.
| Code | ØA | B | C | ØD | Weight Gr. | Str. Kg. |
| IMA10AG | 10 | 4.5 | 11.5 | 3 | 3 | 0.4 |
| IMA13AG | 13 | 4.5 | 11.5 | 3 | 5 | 1 |
| IMA16AG | 16 | 4.5 | 11.5 | 3 | 6 | 1.8 |
| IMA20AG | 20 | 6 | 13 | 3 | 11 | 3 |
| IMA25AG | 25 | 7 | 15 | 4 | 22 | 4 |
| IMA32AG | 32 | 7 | 15 | 4 | 32 | 8 |
Thread Magnetic System
It has a small bolt that stands out with a metric of different dimensions depending on diameter and magnet weight.
| Code | ØA | B | C | ØD | ØM | Weight Gr. | Fza. Kg. |
| IMA10 A | 10 | 4.5 | 11.5 | 6 | 3 | 3 | 0.4 |
| IMA13 A | 13 | 4.5 | 11.5 | 6 | 3 | 5 | 1 |
| IMA16 A | 16 | 4.5 | 11.5 | 6 | 3 | 6 | 1.8 |
| IMA20 A | 20 | 6 | 13 | 6 | 3 | 11 | 3 |
| IMA25 A | 25 | 7 | 15 | 8 | 4 | 22 | 4 |
| IMA32 A | 32 | 7 | 15 | 8 | 4 | 32 | 8 |
| IMA36 A | 36 | 8 | 16 | 8 | 4 | 45 | 10 |
| IMA40 A | 40 | 8 | 18 | 10 | 5 | 60 | 12.5 |
| IMA50 A | 50 | 10 | 22 | 12 | 6 | 110 | 22 |
| IMA63 A | 63 | 14 | 30 | 15 | 8 | 240 | 35 |
| IMA80 A | 80 | 18 | 34 | 20 | 10 | 520 | 60 |
| IMA100 A | 100 | 22 | 43 | 22 | 12 | 940 | 90 |
| IMA125 A | 125 | 26 | 50 | 25 | 14 | 1720 | 130 |
2. Circular ceiling magnets
Circular ceiling magnets painted in white and with open hook.
We have a wide range of magnets with hooks for advertising applications (warehouses, supermarkets, etc,..)
The magnetic pull of each measurement is shown in the following chart.
These values are the result of a measuring carried out in the very best conditions and with a metallic piece of 10mm. If magnets of a smaller width were used, the magnetic pull would be reduced.
Bolt Magnetic System
| Code | ØA | B | C | ØD | ØM | Weight Gr. | Str. Kg. |
| IMA16BL | 16 | 4.5 | 11.5 | 6 | 3 | 6 | 1.8 |
| IMA20BL | 20 | 6 | 13 | 6 | 3 | 11 | 3 |
| IMA25BL | 25 | 7 | 15 | 8 | 4 | 22 | 4 |
| IMA32BL | 32 | 7 | 15 | 8 | 4 | 32 | 8 |
| IMA40BL | 40 | 8 | 18 | 10 | 5 | 60 | 12.5 |
| IMA50BL | 50 | 10 | 22 | 12 | 6 | 110 | 22 |
| IMA63BL | 63 | 14 | 30 | 15 | 8 | 240 | 35 |
3. Square Ceiling Magnets
Square ceiling magnets covered in black plastic.
These magnets are ideal for using on metallic surfaces because they represent a practical and safe holding.
BLP ceiling magnets have a tilting system which allows a better holding to any metallic ceiling.
Square Ceiling Magnets Standard Measurements
Inside Thread Magnetic System
| Code | A | B | C | Str. Kg. |
| IMA59BLPA | 58 | 58 | 15 | 30 |
Exterior Thread Magnetic System
| Code | A | B | C | Str. Kg. |
| IMA58BLPA | 58 | 58 | 15 | 30 |
4. Rare Earth Systems
This type of pot magnets is produced with rare earth magnets (Neodymium/Samarium). Thanks to its great magnetic pull, it is able to reduce outstandingly the size of the magnet, since it is used especially in applications in which the space for its placing is very reduced.
These type of systems are protected by a metallic or brass body. Other sizes or aluminium protection may be supplied by order.
The main function of this type of bases is to hold pieces. An important advantage of this type of pot magnets with regard to magnets is its magnetic field, which is concentrated in only one direction, so as to free the exterior part of magnetic field. Its reduced dimensions and its great magnetic pull make these type of pots the ideal solution for a great variety of ideas.
Neodymium Magnetic Systems
Neodymium quality magnetic systems stand a maximal working temperature of 80ºC. Special Neodymium pieces with a 150ºC working temperature may be supplied by order.
Neodymium Magnetic Systems
This type of pot magnets, thanks to its low weight and great magnetic pull make them the ideal solution for any type of applications.
This system makes working and manipulating more comfortable and flexible.
Neodymium Magnetic Systems
This type of pot magnets, thanks to its low weight and great magnetic pull make them the ideal solution for any type of applications.
This system makes working and manipulating more comfortable and flexible.
Cylindrical Neodymium Magnetic System
This system is ideal for holding pieces in reduced spaces, where a great magnetic pull is required.SCA-N Measurements
The system makes working and manipulating more comfortable and flexible.
| Code | ØA | B | C | ØD | ØM | Weight Gr. | Str. Kg. |
| IMA 6 SCA-N | 6 | - | 12 | 6 | 3 | 1.5 | 0.5 |
| IMA 8 SCA-N | 8 | 4.5 | 11.5 | 6 | 3 | 2 | 1.3 |
| IMA 10 SCA-N | 10 | 4.5 | 11.5 | 6 | 3 | 3 | 2.5 |
| IMA 13 SCA-N | 13 | 4.5 | 11.5 | 6 | 3 | 5 | 6 |
| IMA 16 SCA-N | 16 | 4.5 | 11.5 | 8 | 4 | 7.5 | 9.5 |
| IMA 20 SCA-N | 20 | 6 | 13 | 8 | 4 | 16 | 14 |
| IMA 25 SCA-N | 25 | 7 | 14 | 8 | 4 | 25 | 20 |
| IMA 32 SCA-N | 32 | 7 | 15.5 | 10 | 5 | 48 | 35 |
SCB-N Measurements
Thanks to the low weight and great magnetic pull of these pot magnets, they represent the ideal magnet for any type of application.
| Code | ØA | B | Weight Gr. | Str. Kg. |
| IMA 6 SCB-N | 6 | 4.5 | 1 | 0.5 |
| IMA 8 SCB-N | 8 | 4.5 | 1.5 | 1.3 |
| IMA 10 SCB-N | 10 | 4.5 | 2.5 | 2.5 |
| IMA 13 SCB-N | 13 | 4.5 | 4.5 | 6 |
| IMA 16 SCB-N | 16 | 4.5 | 6.5 | 9.5 |
| IMA 20 SCB-N | 20 | 6 | 15 | 14 |
| IMA 25 SCB-N | 25 | 7 | 22 | 20 |
| IMA 32 SCB-N | 32 | 7 | 40 | 35 |
Cylindrical Neodymium Magnetic Systems
This system is ideal for holding pieces in reduced spaces, where a great magnetic pull is required.
| Code | ØA | B | Weight Gr. | Str. Kg. |
| IMA 6 SC-N | 6 | 20 | 4.5 | 1 |
| IMA 8 SC-N | 8 | 20 | 8 | 2.5 |
| IMA 10 SC-N | 10 | 20 | 12.5 | 4.5 |
| IMA 13 SC-N | 13 | 20 | 20 | 7 |
| IMA 16 SC-N | 16 | 20 | 32 | 15 |
| IMA 20 SC-N | 20 | 25 | 60 | 28 |
| IMA 25 SC-N | 25 | 35 | 135 | 45 |
| IMA 32 SC-N | 32 | 40 | 250 | 70 |
Through Hole Neodymium Magnetic System
It has a through hole in order to make holding easier.
| Code | ØD | H | ØD1 | ØD2 | Weight Gr. | Str. Kg. |
| IMA 16 NdCv | 16 | 4.5 | 3.5 | 6.6 | 5.7 | 7.5 |
| IMA 20 NdCv | 20 | 6 | 4.5 | 9.0 | 12.5 | 10.5 |
| IMA 25 NdCv | 25 | 7 | 4.5 | 9.0 | 23.5 | 16 |
| IMA 32 NdCv | 32 | 7 | 5.5 | 11.0 | 38.5 | 31 |
| IMA 40 NdCv | 40 | 8 | 5.5 | 10.6 | 74 | 50 |
Exterior Thread Neodymium Magnetic System
They have an exterior metric. They may be used in any system where a great magnetic pull is required.
| Code | ØD | H | L | ØM | Weight Gr. | Str. Kg. |
| IMA 10 NDAG | 10 | 4.5 | 12.5 | 4 | 3 | 2.5 |
| IMA 13 NDAG | 13 | 4.5 | 12.5 | 5 | 5 | 6 |
| IMA 16 NDAG | 16 | 4.5 | 12.5 | 6 | 7.5 | 9.5 |
| IMA 20 NDAG | 20 | 6 | 16 | 6 | 16 | 14 |
| IMA 25 NDAG | 25 | 7 | 17 | 6 | 25 | 20 |
| IMA 32 NDAG | 32 | 7 | 17 | 6 | 48 | 35 |
Samarium Magnetic Systems
This system is used in process in which a great magnetic pull and a high working temperature (max. 200ºC) is required.
This type of systems are produced in different versions. They have a metallic flat body with a small outing of different dimensions depending on the magnets' diameter and weight. Also, they can have an iron piece in the centre, which allows a stronger magnetic pull.
Samarium Cylindrical Magnetic System
This type of pots are made with a small iron piece in the centre, which allows a stronger magnetic pull.Standard Measurements - SCA-C Pot Magnets
It has a small bolt that stands out with a metric of different dimensions depending on diameter and magnet weight.
| Code | ØA | B | C | ØD | ØM | Weight Gr. | Str. Kg. |
| IMA 6 SCA-C | 6 | - | 12 | 6 | 3 | 1.5 | 0.5 |
| IMA 8 SCA-C | 8 | 4.5 | 11.5 | 6 | 3 | 2 | 1.1 |
| IMA 10 SCA-C | 10 | 4.5 | 11.5 | 6 | 3 | 3 | 2 |
| IMA 13 SCA-C | 13 | 4.5 | 11.5 | 6 | 3 | 5 | 4 |
| IMA 16 SCA-C | 16 | 4.5 | 11.5 | 8 | 4 | 7.5 | 6 |
| IMA 20 SCA-C | 20 | 6 | 13 | 8 | 4 | 16 | 9 |
| IMA 25 SCA-C | 25 | 7 | 14 | 8 | 4 | 25 | 15 |
| IMA 32 SCA-C | 32 | 7 | 15.5 | 10 | 5 | 48 | 22 |
Standard Measurements - SCB-C Pot Magnets
This system is used in process in which a great magnetic pull and a high working temperature (max. 200ºC) is required.
| Code | ØA | B | Weight Gr. | Str. Kg. |
| IMA 6 SCB-C | 6 | 4.5 | 1 | 0.5 |
| IMA 8 SCB-C | 8 | 4.5 | 1.5 | 1.1 |
| IMA 10 SCB-C | 10 | 4.5 | 2.5 | 2 |
| IMA 13 SCB-C | 13 | 4.5 | 4.5 | 4 |
| IMA 16 SCB-C | 16 | 4.5 | 6.5 | 6 |
| IMA 20 SCB-C | 20 | 6 | 15 | 9 |
| IMA 25 SCB-C | 25 | 7 | 22 | 15 |
| IMA 32 SCB-C | 32 | 7 | 40 | 22 |
Standard Measurements - Cylindrical Samarium Magnetic System
This type of bases are made with a small iron piece in the centre, which allows a stronger magnetic pull.
| Code | ØA | B | Weight Gr. | Str. Kg. |
| IMA 6 SC-C | 6 | 20 | 4.5 | 0.8 |
| IMA 8 SC-C | 8 | 20 | 8 | 2.2 |
| IMA 10 SC-C | 10 | 20 | 12.5 | 4 |
| IMA 13 SC-C | 13 | 20 | 20 | 6 |
| IMA 16 SC-C | 16 | 20 | 32 | 12.5 |
| IMA 20 SC-C | 20 | 25 | 60 | 23 |
| IMA 25 SC-C | 25 | 35 | 135 | 40 |
| IMA 32 SC-C | 32 | 40 | 250 | 60 |